Bredenoord Offshore 2312736F4602307C008C26Aeaf167B5E 2
Request an offer
or call directly to +31 55 3018501
  • 24/7 service
  • Fast delivery
  • Fuel management
  • Delivery service
  • Technical expert since 1937
Close form Close X

Request an offer

Specifications

Technical specs 60 Hz
? Power 600 kVA
? Measurements 6.058 x 2.438 x 2.591m
? Maximum tank capacity 1,400 l
? Maximum weight (empty) 13,000 kg
? Maximum weight (full) 14,000 kg
Environment IMO Tier II
Close X Power
The genset’s power is expressed in kVA. To calculate the required power you can use the following formulas. A: 100 kVA = 80 kW = 144 amp (cos phi 0.8). B. For powering light and heating calculate an additional 20% (cos phi 1). C. An electric engine can (depending on the type and its application) ask up to eight times its power during loaded runs. A genset can, very briefly, deliver 2x its nominal power. If the load of the genset primarily consists of electric engines, or if you are otherwise uncertain about the required power, we advise contacting our experienced staff. They can calculate precisely what you need. Close X Measurements
Measurements are noted in length x width x height. Close X Maximum tank capacity
The tank capacity shows how much fuel the internal or external tank of the genset can hold. The genset uses approximately 20 liters of diesel per 100 kVA used, which means a 50 kVA genset running a load of half its capacity uses approximately 5 liters per hour. Close X Maximum weight (empty)
This is the weight without fuel. Close X Maximum weight (full)
This is the weight including fuel.

Related products

Looking for the ideal setup? Our technical advisers will gladly help you out!

Fuel tanks Show product Distribution boxes Show product Cables Show product
Our solution Icon Service 1. Technical advice Genset, fuel, hybrid energy, storage, monitoring Icon Tender 2. Quote Receive a competitive quote Icon Transport 3. Transport Fast delivery by our drivers Icon Generator 4. Delivery service Skillful placement and connection by our drivers Icon Bredenoord 5. Your Power! Start your project straight away

Specifically designed Heavy Duty Offshore Genset

  • Designed for extreme conditions and compliant with the NORSOK requirements
  • The first Offshore Rental Genset in the world that fully meets the standards set by IMO Tier II and BCS certifications
  • Wireless online monitoring
  • External fuel tank connection
  • Switchable 50-60 Hz
  • Maximum temperature 45 ° C
  • Connectable to other gensets (load sharing)
  • Dual start
  • Externally accessible control panel
  • Exhaust pipe ready for extension
  • Sea water filter
  • Duplex fuel filters

DNV-GL certified

  • For Marine & Offshore, wind farms and petro-chemical industry

Custom-built containerized

  • DNV2.7-1 compliant. Included with CSC access for easy transport all over the world.

Offshore safety equipment

  • DNV certified FiFi-system, local and remote, in A60 compartments
  • Air shut-off valve / Rig-saver
  • NORSOK M501 painted and welded for use under extremely difficult conditions
  • DNV2.7-1 and ISO 20 ft. Offshore container with certified sling ropes
  • Muffler with integrated DNV approved spark arrester
  • Marine Certified control panel with Rental firmware (IACS approved)- SS316 Earth bosses (5x)
  • Gas detection