- 24/7 service
- Fast delivery
- Fuel management
- Delivery service
- Technical expert since 1937
Request an offer
|?||Connection||Power supply rail|
|?||Measurements (LxWxH)||3.76 x 1.40 x 2.50m|
|?||Maximum tank capacity||673 l|
|?||Maximum weight (empty)||3,880 kg|
|?||Maximum weight (full)||4,450 kg|
|?||Sound level at 7 meters||64 dB (A)|
|?||Fuel||Diesel, GTL, HVO biofuel|
|?||Environment||Drip tray with level detection|
The genset’s power is expressed in kVA. To calculate the required power you can use the following formulas. A: 100 kVA = 80 kW = 144 amp (cos phi 0.8). B. For powering light and heating calculate an additional 20% (cos phi 1). C. An electric engine can (depending on the type and its application) ask up to eight times its power during loaded runs. A genset can, very briefly, deliver 2x its nominal power. If the load of the genset primarily consists of electric engines, or if you are otherwise uncertain about the required power, we advise contacting our experienced staff. They can calculate precisely what you need. Connection
A genset can be connected in several ways. Gensets of up to 100 kVA are equipped with a wall outlet and 3-phase track. Starting at 100 kVA only the 3-phase track can be used. The wall outlet goes up to 125 ampere. Powerlock is an option as well. We use a separate connection per ground. Measurements (LxWxH)
Measurements are noted in length x width x height. Maximum tank capacity
The tank capacity shows how much fuel the internal or external tank of the genset can hold. The genset uses approximately 20 liters of diesel per 100 kVA used, which means a 50 kVA genset running a load of half its capacity uses approximately 5 liters per hour. Maximum weight (empty)
This is the weight without fuel. Maximum weight (full)
This is the weight including fuel. Sound level at 7 meters
Sound is always expressed in decibel and measured at a 7 meter distance. Fuel
The gensets are running on fuel. There are various types of fuel available: HVO, diesel, GTL. Environment
By default equipped with an internal drip tray and level detection. ESaver, biofuel, ISO certification, et cetera.
Looking for the ideal setup? Our technical advisers will gladly help you out!
150 kVA generator
Do you want to be certain you always have access to power, even in case of an unexpected power outage or during grid maintenance? Then rent a 150 kVA generator from Bredenoord. We will ensure you will never have to worry about your power supply again, wherever you are.
Our 150 kVA genset is highly suitable for use at large events or parties, for industrial work or on construction sites. In addition this generator can serve as a backup installation, for example for hospitals or office buildings. Our 150 kVA generator only produces 64 dB, measured at a 7 meter distance (comparable to a dishwasher), and therefore won’t cause noise pollution. In addition this genset has been equipped with a drip tray with level detection, so you’ll notice quickly when it’s almost full.
Are you not sure if a 150 kVA generator is what you’re looking for? That’s not a problem. Owing to our many years of experience you can rely on our expert advice. We offer high quality solutions at a competitive price. Our experts will ask the right questions to determine the exact requirements your generator must meet.
For example, it is possible to combine your 150 kVA genset with a hybrid system like the ESaver, which allows you to save fuel and reduce emission.
After you’ve made your choice our drivers will quickly deliver to the location of your choice. We can offer this fast delivery through our own transportation and delivery service, which will deliver and connect the gensets from our large supply anywhere on location. You won’t have to figure out the connections yourself: we will take care of that for you. Do you have any questions or suggestions during the use of the genset? We are at your disposal then as well.
Is a 150 kVA generator the solution for your power demand? Inquire after this to our Rental Team.